The most advanced epoxy on the market.
Engineered specifically for Bar Tops, Tabletops & Countertops.
Works on virtually any surface.
- Stainless Steel
- Bottle Caps
Our unique blend of Polycarbons are formulated to resist scratching and to provide extreme durability in the most demanding of environments.
Crystal-Clear Transparent Finish.
Our Nano-crystal technology enhances the natural beauty of any surface, giving it a greater sense of depth and contrast.
Great Results, Little Effort.
"This was my first time ever using epoxy and I couldn’t be happier with the results. Even with no experience I found the instructions were simple to follow but completely thorough. The surface looks like glass!" Bryan Martin - Miami, Florida
The UltraClear Difference.
USA Based Materials
We start with USA based chemical polymers that are 100% VOC Free and food safe. UltraClear does NOT import any chemicals from overseas that oftentimes can be hazardous to your health.
Extreme Level of Hardness
UltraClear Epoxy has been tested and verified to cure at a Shore D Hardness Rating of 98. This extreme hardness means more scratch resistance, more durability with high traffic use, and a much longer life span for your surfaces.
Never Yellows, Fades, or Cracks
The most popular epoxy brands all show yellowing visibly over time. UltraClear has spent over a decade perfecting our formula to resist yellowing. UltraClear Epoxy is composed of cellular non-fade prepolymers that ensure long lasting protection, durability, and shine.
100% VOC Free. Virtually Odorless.
Use in odor-sensitive areas such as wineries, restaurants, kitchens, or confined spaces.
Patented™ One-coat System.
Save time and money.
Ordinary epoxies self level at 1/16" requiring multiple coats. UltraClear Epoxy is a one-coat system designed to self-level at 1/8", creating a virtually indestructible surface. Avoid multiple coats and save money with UltraClear epoxy.
Atomic configuration is formulated so that the UltraClear epoxy is more durable, scratch resilient, and fundamentally tougher than ordinary epoxies.
Trusted by over 100,000 happy customers.
How to use UltraClear Epoxy.
No experience needed.
Step 1: Measure Epoxy
UltraClear Bar Top and Table Epoxy is a two-part epoxy coating with a one to one ratio. Pour an equal amount of hardener and resin into a new container.
Step 3: Pour Epoxy
Pour the epoxy onto your surface. UltraClear Epoxy self levels so there is no need to move it around with any tools like most other epoxy products.
For most applications, UltraClear Epoxy is applied in two stages, the Seal Coat stage and the Flood Coat stage.
Seal Coat: The seal coat is a small batch of epoxy that is brushed on in a thin layer to seal any pores in the surface and prevent air bubbles from forming in the following flood coat. Our epoxy is used for both the seal coat and the flood coat. It is the same product that is applied to the surface with a paint brush.
Flood Coat: After waiting 4-6 hours from when the seal coat was applied, a flood coat is simply poured on the surface and it self-levels to 1/8" thick.
Side and Edges: When pouring over the Sides and Edges of a table, counter, or bar top, make sure that you purchase extra material to account for spillage over the sides as you will lose 30% of the material coating them.
*Covering embedded objects will require additional epoxy. Make sure you have accounted for this.
**The calculations below are (either) (or) for the seal coat and flood coat. Example: 1 gallon will cover either 16 sq.ft. for a flood coat or 48 sq.ft. for a seal coat, NOT BOTH. These calculations are not intended to give more than a rough estimate. Precise epoxy needs will vary according to many factors, including application type and surface material. For specific advice regarding your project, contact our customer service department
1 Gallon of Epoxy = 1/2 gal. Resin + 1/2 gal. Hardener
Free 2-Day Shipping. No Sales Tax.
Shipping is free when you spend over $45 (lower 48 states only). Orders placed by 4pm eastern time will ship same day. Orders arrive in 2 days. Limited time offer!
Customer ReviewsWrite a review
We are new to this process so kind of learned as we went. It took 4 shots at it but finally got it nailed. The finished result looks amazing, everyone comments on how clear and glassy the table top looks. The first time we poured the room wasn't very warm (in the mid 60's) and the product wasn't very warm. It was very thick and didn't want to flow and spread good. That was our fault. Later pours we warmed the room to the low 70s and warmed up the product, much smoother of a flow and spreading was much easier. Then our next mistake was damming the edges. After we pulled the dam off, the edges looked bad. Again our fault. We had to sand the edges really good to get all the lumps and bumps out. Did a 4th and final pour with no dam, it flowed over the edges and left the edges looking WAY better. We'll be using this product every time from now on.
Good and very detailed instruction. easy to use.
The epoxy really made the wood really more dramatic looking and brings out the colors of the stain we used. Lots of compliments.