Questions? Feedback? powered by Olark live chat software
  Loading... Please wait...

Tutorial Videos

Mixing Epoxy This video demonstrates how to properly mix a batch of UltraClear Epoxy. It is important that you use a new container for each batch of epoxy that you mix so that the next batch does not get contaminated from the remnants of curing epoxy in the previous container. You can purchase a tool kit that comes with all of the items you will need in our Tools & Supplies. Just make sure to purchase extra containers depending on the number of epoxy batches you will be pouring.


Seal Coat Application This video shows how to apply a Seal coat of UltraClear Epoxy followed by a Flood coat. For beginners it is best to mix up a smaller batch of epoxy for the seal coat to make sure it does not start curing in the container before you finish. When you run out, you simply mix up another seal coat batch and paint it on where you left off. Small containers can be purchased in our Tools & Supplies section of the website.


Pouring Epoxy on a Table with No Edge The table in this video is made with copper sheets from ColorCopper.com. This videos show you how to pour UltraClear epoxy on a surface that DOES NOT have a raised edge. A Seal coat of UltraClear epoxy is NOT necessary on metal, laminate, and other solid surfaces. You simply put down 4 mil painters plastic around the area to catch the epoxy so that it does not get on your floor. Epoxy can go through cardboard so if you do use that, you will need 3 to 4 layers. The 4 mil painters plastic is the best choice.


Making a Penny Bar or Table Top with our UltraClear Epoxy. Glue down all your pennies first with any type of glue. Make sure the glue is completely dry and then you will paint on a seal coat of epoxy. Wait 4-6 hours and then you can pour the flood coat of epoxy.


Bottle Cap Table and Bar Top Tutorial How to make a bottle cap bar top or bottle cap table with our UltraClear Epoxy. In the video, you will see that we used the seal coat as our glue to hold down the bottle caps so they are securely fastened to the surface and do not float to the top of the flood coat. Just paint on a thicker seal coat so that it surrounds the bottle caps. Then wait until the next day and you can pour the flood coat. One flood coat is all that is neccessary to coat the bottle caps if you have a raised edge all the way around your surface.


Sticker Bar Top or Table Top How to make a Beer Sticker Bar Top or Table Top with our UltraClear Epoxy. The same would work for beer labels, decals, and photos. Make sure your items are glued down. For thin material such as paper, maps, magazine articles, we recommend that you apply a coat of elmers glue over the items first to seal them as the epoxy can soak through and discolor them. You may also use a crafter paper coating called Mod Podge that is sold at Walmart or on Amazon.com.


Customer sent this video in: Epoxy Table with Pearl Inlay and LED Lighting

*Disclaimer* The tutorial videos on this page are for demonstration purposes only. Minor steps may have been omitted for time purposes. Please read the complete instructions included with your materials.


Terms of Use   |   Privacy Policy

Copyright © 2017 BestBarTopEpoxy.com. All rights reserved.