Three-inch Seal Coat Brush
This three-inch brush is a must-have item for applying an epoxy seal coat or for applying Mod Podge over your paper items before the epoxy.
- A three-inch bristle brush.
- Each brush features 5/16" brush thickness and 1-11/16" bristle length.
- An excellent choice for when you have a large surface to cover.
- Constructed with high quality bristles that are resistant to shedding during seal coating.
Hello, 12 ft Mahogany counter top, well sanded to 320 grit. I Followed the directions to a T. had to build a plastic room around the area to maintain 74 degrees and used a small heater. (i'm in upstate NY.) Put on 2 heavy seal coats 24 hours apart, sanded lightly and wiped with denatured alcohol between all coats. and one top coat, ( yes I turned off heater and aired room till alcohol evaporated. Brushes, mixer and plastic pails were worth the money. Beautiful job and finish. Used a quality heat gun to release bubbles. Not one visible on finished top. Please buy enough product. use the calculator on the website and follow the directions
Was told by paint contractor a good brush makes a big difference. This was a brush he thought would be good. He was right-made a big difference in final project. It was great.