Three-inch Seal Coat Brush

First time using ultra clear bar top epoxy.I was a little hesitant at first. But after following all the directions I was more than pleased with the results.The staff were more than helpfull .

Works

Looks great

Hello, 12 ft Mahogany counter top, well sanded to 320 grit. I Followed the directions to a T. had to build a plastic room around the area to maintain 74 degrees and used a small heater. (i'm in upstate NY.) Put on 2 heavy seal coats 24 hours apart, sanded lightly and wiped with denatured alcohol between all coats. and one top coat, ( yes I turned off heater and aired room till alcohol evaporated. Brushes, mixer and plastic pails were worth the money. Beautiful job and finish. Used a quality heat gun to release bubbles. Not one visible on finished top. Please buy enough product. use the calculator on the website and follow the directions

Was told by paint contractor a good brush makes a big difference. This was a brush he thought would be good. He was right-made a big difference in final project. It was great.

Great quality on this brush I almost feel bad about using it for epoxy!